BLUE-POWER screws

Product description		Product advantages
The BLUE-POWER System is developed for the multiple fixing of wooden façade substructures onto concrete or masonry with an insulation layer between the both of them. The system does bear both the load of the façade and the wind load. The BLUE-POWER screws therefore are fixed in an angle of 90° through a pre-drilled counter batten (made of soft wood) through the insulation into the anchoring base, which is pre-drilled, too. Dowels are not needed.		Quick and easy solution Plug-free installation Short assembly times Can be used with standard battery-driven electric tools

For façade fastenings where wooden sub-structures are to be fixed on concrete or masonry at a distance
Outdoors: rear-ventilated curtain façade with façade insulation
Indoors: e. g. suspended ceilings, wall paneling etc.
About use of Blue-Power screws follow the instruction on the product data sheet and local building regulations

Case-hardened carbon steel, Zinc-Nickel coating
High corrosion-resistance
For the use in environmental class C4 long and C5-M long according to EN 12944-6
For the use in service class 1 and 2 according to EN 1995-1-1 (Eurocode 5)
High strength against bending by high yield moment of the screw
Not to be used for counter battens from tannin-rich wood