|Šī lapa pēc kāda laika tiks iztulkota uz latviešu valodu.|
The SILL CONNECTION PROFILE made of EPS-F offers the best possible heat and moisture protection. It enables technically and visually clean installation/attachment of the exterior and interior window sill that is individually adapted to the installed window or door elements – including optimal thermal separation.
The SILL CONNECTION PROFILE is narrow than the window frame, so it is possible to optimally position the inner or outer window sill. Those profiles can be produced at heights of 30 to 80 mm. A tongue and groove connection allows unlimited extension here and the excellent compressive strength of 1,26 kg/dm² means that the profiles can also be used for large and very wide window elements without any problems.
AREA OF APPLICATION
The profile-specific SILL CONNECTION PROFILES for plastic, wood or aluminium windows are available in various shapes and heights. Those may be used for installation in the reveal and in front of the wall. Those are suitable for stone and aluminium window sills due to the overall height of 35 and 40 mm.
LENGTH ADJUSTMENT AND SEALING
Tongue and groove connection allow to use SILL CONNECTION PROFILE with unlimited length.
To screw onto the window sill, we recommend a window sill screw with pressed-on washer in A2 4.5 x 35 mm.
To fit the window frame equipped with SILL CONNECTION PROFILE into the frame aperture apply a trace of Hybrid Polymer Power Fix to the lower installation frame profile as a sealant. Lift the window on to the position and fix mechanically.
|Window sill connection profile|
|Building material class||DIN EN 13501-1||E|
|Bulk density||150 kg/m³ ± 15%|
|UV light stability||12 months direct weathering during the construction|
|Compatibility with adjacent building materials||compatible, except for solvents, solvent-bearing materials and materials that are not polystyrene-compatible|
|Thermal conductivity||DIN EN 12667||λ = 0,040 W/m*K|
|Form stability under thermal load||-40°C to +85°C|
|Temperature stability range||ISO 75-1||long term +85°C|
|Ageing resistance||mould-proof, non-rotting|
|Bending resistance||DIN EN 12089||≥ 650 kPa|
|Shearing stress||DIN EN ISO 14130||X = 0,217 N / mm²|
|Air permeability||EN 12207||Class 4|
|Compressive load bearing capacity at max.|
total deformation of 2%
|Screw withdrawal value:|
(Frame screw Fix FK-T30 7.5 x 62 mm)
|Water absorption (28 days storage)||DIN 12087||≤ 1.5 Vol. %|
|Water vapour diffusion resistance μ||DIN EN ISO 12572||380-550|
|Waste code||170604; 170904|
|Shelf life||2 years|
|Product Data Sheet|