(+372) 517 9107 (+372) 58 868 956

Lango palangės jungties profilis

Window installation, vapour diffusion, thermal insulation, passive house, trio, energy efficient, mounting, installation frame, kliima, klimats, klimata, Ψ-value, framer, triotherm, plinth, window sill connection profile

        
Artimiausiu metu dabartinis puslapis bus išverstas į Lietuvių kalbą.
 

PRODUCT DESCRIPTION

 

PRODUCT ADVANTAGES

The SILL CONNECTION PROFILE made of EPS-F offers the best possible heat and moisture protection. It enables technically and visually clean installation/attachment of the exterior and interior window sill that is individually adapted to the installed window or door elements – including optimal thermal separation.

The SILL CONNECTION PROFILE is narrow than the window frame, so it is possible to optimally position the inner or outer window sill. Those profiles can be produced at heights of 30 to 80 mm. A tongue and groove connection allows unlimited extension here and the excellent compressive strength of 1,26 kg/dm² means that the profiles can also be used for large and very wide window elements without any problems.

 
  • Guarantees high thermal insulation
  • The negative influences of hollow profiles have been eliminated 
  • Reduction of the thermal bridge
  • Secure load transfer, even with high element weights
  • Secured screw connection of the aluminium window sill
  • Reduction of service required for window adjustment
  • Suitable for all plastic and/or aluminium windows due to individual cutting
  • Area of application in new and old buildings

AREA OF APPLICATION

  

The profile-specific SILL CONNECTION PROFILES for plastic, wood or aluminium windows are available in various shapes and heights. Those may be used for installation in the reveal and in front of the wall. Those are suitable for stone and aluminium window sills due to the overall height of 35 and 40 mm.

 

Window installation, vapour diffusion, thermal insulation, passive house, trio, energy efficient, mounting, installation frame, kliima, klimats, klimata, Ψ-value, framer, triotherm, plinth, window sill connection profile 

LENGTH ADJUSTMENT AND SEALING

Tongue and groove connection allow to use SILL CONNECTION PROFILE with unlimited length.
Seal between the window frame and the SILL CONNECTION PROFILE with Hybrid Polymer Crystal and fasten to the window frame with a drilling screw 4,8x50mm (standard DIN 7504).

To screw onto the window sill, we recommend a window sill screw with pressed-on washer in A2 4.5 x 35 mm.

To fit the window frame equipped with SILL CONNECTION PROFILE into the frame aperture apply a trace of Hybrid Polymer Power Fix to the lower installation frame profile as a sealant. Lift the window on to the position and fix mechanically.

Window installation, vapour diffusion, thermal insulation, passive house, trio, energy efficient, mounting, installation frame, kliima, klimats, klimata, Ψ-value, framer, triotherm, plinth, window sill connection profile  
 
Technical dataStandardClassification
Window sill connection profile  
Material description  EPS-F
Colour  grey
Building material class DIN EN 13501-1E
Bulk density 150 kg/m³ ± 15%
UV light stability 12 months direct weathering during the construction
phase
Compatibility with adjacent building materials compatible, except for solvents, solvent-bearing materials and materials that are not polystyrene-compatible 
Thermal conductivity DIN EN 12667λ = 0,040 W/m*K
Form stability under thermal load -40°C to +85°C
Temperature stability range ISO 75-1long term +85°C
Ageing resistance  mould-proof, non-rotting
Bending resistanceDIN EN 12089≥ 650 kPa
Shearing stressDIN EN ISO 14130X = 0,217 N / mm²
Air permeabilityEN 12207Class 4
Compressive load bearing capacity at max.
total deformation of 2%
 1,260 kg/dm²
Screw withdrawal value:
(Frame screw Fix FK-T30 7.5 x 62 mm)
 2100 N
Water absorption (28 days storage) DIN 12087≤ 1.5 Vol. %
Water vapour diffusion resistance μ DIN EN ISO 12572380-550
Waste code 170604; 170904
Shelf life 2 years
 
 
Product Data Sheet