(+372) 517 9107 (+372) 58 868 956

Maastikukujundus

ISO-CONNECT KSKSEAL

Window installation, air permeability, vapour diffusion resistance, thermal insulation, sound reduction, passive house, energy efficient, cost efficient, mounting, Ψ-value, membrane, bitumen compatible                    

PRODUCT DESCRIPTION

PRODUCT ADVANTAGES

ISO-CONNECT KSKSEAL is an all-over self-adhesive, flexible sealing membrane made of polymer-modified bitumen with a flexible yet tearproof HDPE foil and is used for the external sealing of window and door elements in facade constructions. ISO-CONNECT KSKSEAL protects components in contact with the ground permanently against non-pressurised water as per DIN 18195-5 for sealing thresholds, ground moisture (capillary and retained water) and non-accumulating seepage water (DIN 18195-4).

  • can be installed all year round
  • no hard-drying necessary
  • immediately resistant to water and driving rain
  • no waiting times
  • flexible, resilient and crack-covering
  • highly resistant to all aggressive substances which naturally occur in soil
  • perforated release paper for easier fitting

APPLICATION

DIMENSIONS

ISO-CONNECT KSKSEAL has been designed for the correct physical external sealing of bottom joints on doors and floorlength windows to the perimeter area in accordance with DIN 18195-5. The transition to further bituminous sealing in the perimeter area is thus possible conforming to material requirements.

width: 100, 150, 200, 250, 300, 350 mm further widths and thicknesses available on request

FINISHES

PACKAGING

Completely self-adhesive with separate release paper:
  • 100 – 200 mm width with a longitudinal perforation
  • 250 – 300 mm width with two longitudinal perforations
  • 350 mm width with three longitudinal perforations
rolls, roll length: 20 m
 
Technical data Standard Classification
Material description polymer-modified bitumen on tear-resistant HDPE
Colour black
Building material class DIN EN 13501 E
Bitumen compatible DIN 7864 T1 bitumen compatible
Water vapour diffusion resistance  µ 168,500 / sd-value 252 m
Material thickness 1,5 mm
Handling temperature approximately -5°C to +30°C
Dimension tolerance DIN 7715 T5 P3 DIN EN 1848-1 fulfilled
Storage temperature +5°C to +30°C stored in a verical position
Shelf life 12 months
 

PREPARATION

Window installation, air permeability, vapour diffusion resistance, thermal insulation, sound reduction, passive house, energy efficient, cost efficient, mounting, Ψ-value, membrane, bitumen compatible

Installation example: ISO-CONNECT KSKSEAL

   
Unroll the ISO-CONNECT KSKSEAL sealing foil and cut it to the required length. The area to be bonded must be clean, dry, free of solvents, greases, dust, oil and other anti-adhesive substances.

PROCESSING

Where necessary treat the area to be bonded with ISO-TOP KSKSEAL PRIMER and then apply the self-adhesive backing to the area to be bonded / sealed and press into place carefully using a roller so that the product is moulded to the contours of the substrate. On the top edge of the seal a flashing strip (ISO-BUTYL FLEECE TAPE) may be required. Additional mechanical fixing, e.g. supporting lath, clamping bar and fastening to the window, should, as specified in DIN 18195, be mounted.
 
Product Data Sheet